Stx Ko Gpio Output - Datamax E-Class Mark II Programmer's Manual

STX KO GPIO Output
This command configures the GPIO outputs of the Applicator Interface Card; see
Appendix J for details.
Syntax:
Where:
Class Series 2 Programmer's Manual
Extended System-Level Command Functions
<STX>KOffnsptd0pw0td1pw1<CR>
- 2 character function name abbreviation (e.g., LC [Label
ff
Complete], LM [Label Movement], etc).
- Pin number, where 1 – 8 is the valid range.
n
- Signal type, where: L = Level; P = Positive Pulse; and N
s
= Negative Pulse
- Polarity, where: 0 = Active Low; and 1 = Active High
p
- 3 character delay time from function condition "true" to
td0
output signal.
- 3 character pulse width corresponding to the function
pw0
condition becoming "true". (Ignored for level-type
signals.)
- 3 character delay time from function condition "false" to
td0
output signal.
- 3 character pulse width corresponding to the function
pw0
condition becoming "false". (Ignored for level-type
signals.)
109