Datamax E-Class Mark II Programmer's Manual page 191

Font
Font 0
Font 1
Font 2
Font 3
Font 4
Font 5
Font 6
Font 7
Font 8
Internal Smooth Font 9 (Smooth Font) Point Size Specifiers
Label format records with font code 9 (in Format Record header field b) can specify any of
the font sizes in the leftmost column of the table below. The corresponding specification in
either column labeled Ann or 0nn is used in the font size/selection (eee height) field to
select the desired font size. Optional font sets may contain subsets of those described here.
For an optional font set that generates these fonts via scalable font technology, the
character mapping for this font is the selected scalable symbol set (see Appendix E).
In the sample format below, a 300 DPI printer will use 4-point smooth font to produce a
printed label with the words "four point font". Sample format:
<STX>L<CR>
1911A0400100010four point font<CR>
E<CR>
Point Size
4
5
6
8
10
12
14
18
24
30
36
48
72
[1]
All fonts greater than A36 are created from multiples of smaller fonts, 2x or 3x, as available.
[2]
All fonts greater than A24 are created from multiples of smaller fonts, 2x or 3x, as available.
[3]
Available at 300 DPI and greater print resolutions only.
Table C-6: Internal Bitmapped (Smooth Font) 9 Size Chart
Class Series 2 Programmer's Manual
Appendix C – Available Fonts
Height Width
20 14
38 20
54 30
80 42
106 54
154 54
190 94
94 44
82 44
Table C-5: Font Sizes @ 600 DPI Resolution
Smooth Font 9 Font Size Specification Syntax
Ann
[1]
203 DPI
-
-
A06
A08
A10
A12
A14
A18
A24
A30
A36
A48
-
Spacing
2
6
6
6
8
8
12
14
14
300, 400, & 600 DPI
A04
A05
A06
A08
A10
A12
A14
A18
A24
A30
A36
A48
A72
Point Size
2.4
4.6
6.5
9.6
12.7
18.5
22.8
11.3
9.8
0nn
[2]
-
[3]
000
001
002
003
004
005
006
007
008
009
010
-
179