Datamax E-Class Mark II Programmer's Manual page 18

Configuration
Command
<STX>Kf
<STX>Kc
<STX>F
<STX>M
<STX>m
<STX>n
<STX>O
<STX>S
<STX>V
6
Overview
Name
Set Present Distance
Configuration Set
Send Form Feed
Set Maximum Label Length
Set to Metric Mode
Set to Inch Mode
Set Start of Print Position
Set Feed Rate
Software Switch
Function
Determines label stop position, head
relative. <STX>f edge sensor relative
equivalent command, older models.
Determines default power-up
configuration.
Sets the stop position of the printed
label.
Length to search for next gap or
reflective mark; not used with
continuous media.
Subsequent measurements interpreted
in metric (most units, mm/10). Label
equivalent command can be used.
Subsequent measurements interpreted
in inches (most units in/100) label
equivalent command can be used.
Effect is not on the label immediately
following command since media position
is at Start of Print between labels;
<STX>K default position relative
in/100 maximum deviation.
Sets blank label movement speed.
Enables optional hardware, cutter, and
present sensor.
Class Series 2 Programmer's Manual
64