Set Print Speed; Set Backfeed Speed - Datamax E-Class Mark II Programmer's Manual

P

Set Print Speed

This command sets a print speed for a label or batch of labels.
Syntax:
Where:
Sample:
p

Set Backfeed Speed

This command, typically used in conjunction with the Cut or Peel and Present operations,
controls the rate at which the labels will reverse to align to the next start of print
position. The setting remains in effect until another backfeed speed command is
received or until the printer is reset.
Syntax:
Where:
Sample:
Class Series 2 Programmer's Manual
Label Formatting Command Functions
Pa
- Is a single character representing a speed; see
a
Appendix L for valid ranges.
<STX>L
PC
141100001000100LABEL1<CR>
E
<STX>L
141100001000100LABEL2<CR>
E
The sample above prints two labels, the first at a speed of 2
inches per second (51 mm per second) and the second at the
default setting.
pa
- Is a single alpha character representing a speed; see
a
Appendix L for valid ranges.
<STX>L
pF
The sample above sets the printer to a backup speed of 3.5 IPS.
133