Programmable Key Settings For 53I And 55I - Aastra SISIP 53I Administrator's Manual

Configuration Parameters
Hard Key Parameters

Programmable Key Settings for 53i and 55i

• The value of "N" for the following parameters is dependent on the number of
programmable keys available on the 53i models. See the table on
the applicable values
Parameter –
prgkeyN type
Type
(in Web UI)
Description
Format
41-001160-00, Rev 01 Release 2.0
.
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
The type of programmable key to configure. Valid types are:
• none - Indicates no setting for programmable key.
• line - Indicates programmable key is configured for line use.
• speeddial - Indicates programmable key is configured for speeddial
use
• dnd - Indicates programmable key is configured for do not disturb
on the phone. This option is "do not disturb" in the Aastra Web UI).
• blf - Indicates programmable key is configured for Busy Lamp Field
(BLF) use. User can dial out on a BLF configured key.
• list - Indicates programmable key is configured for BLF list use.
User can dial out on a BLF List configured key.
• xml - Indicates programmable key is configured to accept an XML
application for accessing customized XML services. You can also
specify an XML softkey URL for this option.
• flash - Indicates programmable key is set to generate a flash event
when it is pressed on the 53i. The IP phone generates flash events
only when a call is connected and there is an active RTP stream (for
example, when the call is not on hold).
• sprecode - Indicates programmable key is configured to
automatically activate specific services offered by the server. For
example, if the sprecode value of *82 is configured, then by
pressing the softkey, *82 automatically activates a service provided
by the server.
• park - Indicates programmable key is configured to park incoming
calls when pressed.
• pickup - Indicates programmable key is configured to pick up
parked calls when pressed.
• lcr - Indicates programmable key is configured for "last call return"
when pressed.
• directory - Indicates programmable key is configured to access the
Directory List.
• callers list - Indicates programmable key is configured to access
the Callers List.
• conference - Indicates programmable key is configured as a
conference key. Enter as "conf" in configuration files.
• transfer - Indicates programmable key is configured as a Transfer
key for transferring calls. Enter as "xfer" in configuration files.
Text
page 108 for
A-117