Programmable Key Settings For 9112I And 9133I - Aastra 480i Administrator's Manual

Programmable Key Settings for 9112i and 9133i

The value of "N" for the following parameters is dependent on the number
of programmable keys available on the 9112i/9133i models. See the table on
page 172 for the applicable values.
Parameter –
prgkeyN type
Type
(in Web UI)
Description
Format
Default Value
Range
Example
176 IP Phone SIP Admin Guide
Aastra Web UI
Configuration Files aastra.cfg, <mac>.cfg
The type of programmable key to configure. Valid
types are:
• line (9133i only) - Indicates softkey is configured
for line use.
• speeddial - Indicates programmable key is config-
ured for speeddial use
• dnd - Indicates programmable key is configured
for do not disturb on the phone. This option is "do
not disturb" in the Aastra Web UI).
• blf (9133i only) - Indicates programmable key is
configured for Busy Lamp Field (BLF) use. User can
dial out on a BLF configured key.
• list (9133i only; Aastra Web UI only) - Indicates
programmable key is configured for BLF list use.
User can dial out on a BLF List configured key.
• xml - Indicates the programmable key is config-
ured to accept an XML application for accessing
customized XML services.
• flash - Indicates the programmable key is set to
generate a flash event when it is pressed on the
9112i and 9133i.
Note: The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for exam-
ple, when the call is not on hold).
• park - Indicates the softkey is configured to park
incoming calls when pressed.
• pickup - Indicates the softkey is configured to pick
up parked calls when pressed.
Text
Not Applicable
line (9133i only)
speeddial
dnd ("do not disturb" in the Aastra Web UI)
blf (9133i only)
list (9133i only; Aastra Web UI only)
xml
flash
park
pickup
prgkey1 type: speeddial
Operation->Programmable Keys