Mpf Feed Shaft Assembly Removal - Lexmark W850n Service Manual

4024-110

MPF feed shaft assembly removal

1.
Remove the MPF rear cover. See
2.
Remove the MPF feed unit assembly. See
3.
Remove the MPF pick roll. See
4.
Remove the MPF feed drive gear group. See
5.
Remove the two e-rings with a prying tool that secures the feed shaft assembly (A) to the MPF feed unit
assembly.
6.
Remove the two bushings (B).
7.
Release the hooks securing the two feed shaft cams (C), and slide them inward towards the center of the
MPF feed shaft assembly (A).
8.
Remove the feed shaft assembly (A) by moving it to the side then upwards in the direction of the arrow.
Rear
4-60
Printer Service Manual
"MPF rear cover removal" on page
"MPF feed unit assembly removal" on page
"MPF pick roll removal" on page
"MPF feed drive gear group removal" on page
A
C
B
E-Clip
C
4-55.
4-61.
Hook
E-Clip
C
B
4-51.
4-56.