4024-110
Sensor (registration) removal
1.
Remove the MPF rear cover. See
2.
Remove the MPF feed unit assembly. See
3.
Remove the printer left door assembly. See
4.
Remove the registration roll assembly. See
5.
Release the hooks securing the sensor (registration) (A) to the registration roll assembly (B).
6.
Remove the sensor (registration) (A).
7.
Disconnect the connector from the sensor (registration).
4-78
Printer Service Manual
"MPF rear cover removal" on page
"MPF feed unit assembly removal" on page
"Printer left door support strap removal" on page
"Registration roll assembly removal" on page
B
Front
A
Hooks
Front
4-55.
4-51.
4-71.
4-76.
Hook
A