Switch (printer front door interlock) removal
Note: First, remove the bridge unit and the finisher, if equipped. Refer to the Finisher Service Manual.
1.
Remove the top cover assembly. Go to
2.
Remove the printer front door assembly. Go to
3.
Remove the front left cover. See
4.
Remove the front inner cover. See
5.
Remove the screw securing the bracket (A).
6.
Disconnect the connector from the switch (printer front door interlock) (B).
7.
Release the hooks securing the switch (printer front door interlock) (B) to the bracket (A).
8.
Remove the switch (printer front door interlock) (B).
"Top cover assembly removal" on page
"Printer front door assembly removal" on page
"Printer front door assembly removal" on page
"Front inner cover removal" on page
A
Hooks
4-7.
4-8.
4-10.
Front
B
Repair information
4024-110
4-8.
4-5