Lexmark W850n Service Manual page 32

4024-110
Error code or
message
288.04
Paper jam
Check area F
288.05
Paper jam
Check areas
G2, G3
288.06
Paper jam
Check area
G2
32
Unsupported
toner cartridge
34
Incorrect
media, check
tray 1 guides.
34
Incorrect
media, check
tray 2 guides
34
Incorrect
media, check
tray 3 guides
34
Incorrect
media, check
tray 4 guides
80
Scheduled
maintenance
84
Insert PC unit
84
PC unit
abnormal
2-12
Printer Service Manual
Error contents
Sensor (diverter gate) Static
jam (to stacker bin) A
Sensor (diverter gate) Static
jam (to stacker bin) B
Sensor (diverter gate) Static
jam (to stacker bin) C
Toner cartridge RFID failure
Tray 1 media size mismatch
in length
Tray 2 media size mismatch
in length
Tray 3 media size mismatch
in length
Tray 4 media size mismatch
in length
Scheduled maintenance
required
PC cartridge set failure
PC cartridge RFID failure
Description/Action
Paper remains on the sensor (diverter gate) when
the finisher is in the stacker bin exit mode.
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the stacker bin exit mode.
At this time, the sensor (finisher media entrance) is
turned on, but the sensor (bridge unit media exit) is
turned off.
Refer to Finisher Service Manual.
Paper remains on the sensor (diverter gate) when
the finisher is in the stacker bin exit mode.
At this time, both sensor (finisher media entrance)
and sensor (bridge unit media exit) are turned off.
Refer to Finisher Service Manual.
A toner cartridge of a incorrect specification is
installed.
Go to "Toner cartridge RFID failure" on
page 2-75.
The media length detected by the sensor
(registration) after the media is fed from media
tray 1 does not match the length detected by media
tray 1 switch (media size).
Go to "Tray 1 media size mismatch in length" on
page 2-77.
The media length detected by the sensor
(registration) after the media is fed from media
tray 2 does not match the length detected by media
tray 2 switch (media size).
Go to "Tray 2 media size mismatch in length" on
page 2-79.
Refer to Options Service Manual.
Refer to Options Service Manual.
Service is required to maintain printer performance.
Go to "Scheduled maintenance required" on
page 2-70.
The PC cartridge is not installed or is not installed
properly.
Go to "PC cartridge set failure" on page
A PC cartridge of a incorrect specification is
installed.
Go to "PC cartridge RFID failure" on page
2-68.
2-67.