Lexmark W850n Service Manual page 27

Error code or
Error contents
message
243.01 Sensor (tray 3 feed-out) on
jam (tray 3 media feed)
Paper jam
Check areas
C, tray 3
243.02 Sensor (tray 2 feed-out) on
jam (tray 3 media feed)
Paper jam
Check areas
A, B
243.03 Sensor (registration) on jam
(tray 3 media feed)
Paper jam
Check area B
243.04 Sensor (tray 3 feed-out) static
jam
Paper jam
Check area C
244.00 Sensor (tray 4 feed-out) on
jam (tray 4 media feed)
Paper jam
Check areas
C, tray 4
244.01 Sensor (tray 3 feed-out) on
jam (tray 4 media feed)
Paper jam
Check areas
C, tray 4
244.02 Sensor (tray 2 feed-out) on
jam (tray 4 media feed)
Paper jam
Check areas
B, C
244.03 Sensor (registration) on jam
(tray 4 media feed)
Paper jam
Check area B
244.04 Sensor (pre-feed) on jam
(tray 4 media feed)
Paper jam
Check area
tray 4
244.05 Sensor (tray 4 feed-out) static
jam
Paper jam
Check areas
C, tray 4
245.00 Sensor (tray 5 feed-out) on
jam
Paper jam
Check area K,
tray 5
Description/Action
The sensor (tray 3 feed-out) is not turned on within
the specified time after the pre-feed sensor3 is on.
Refer to Options Service Manual.
The sensor (tray 2 feed-out) is not turned on within
the specified time after the sensor (tray 3 feed-out)
is turned on.
Refer to Options Service Manual.
The sensor (registration) is not turned on within the
specified time after the sensor (tray 3 feed-out) is
turned on.
Refer to Options Service Manual.
Media remains on the sensor (tray 3 feed-out).
Refer to Options Service Manual.
The sensor (tray 4 feed-out) is not turned on within
the specified time after the sensor (pre-feed) is
turned on.
Refer to Options Service Manual.
The sensor (tray 3 feed-out) is not turned on within
the specified time after the sensor (tray 4 feed-out)
is turned on.
Refer to Options Service Manual.
The sensor (tray 2 feed-out) is not turned on within
the specified time after the sensor (tray 4 feed-out)
is turned on.
Refer to Options Service Manual.
The sensor (registration) is not turned on within the
specified time after the sensor (tray 4 feed-out) is
turned on.
Refer to Options Service Manual.
The sensor (pre-feed) is not turned on within the
specified time after the tray 4 feed lift motor is
turned on.
Refer to Options Service Manual.
Media remains on the sensor (tray 4 feed-out).
Refer to Options Service Manual.
The sensor (tray 5 feed-out) is not turned on with in
the specified time after the HCF feed lift motor is
turned on.
Refer to Options Service Manual.
4024-110
2-7
Diagnostic information