Lexmark W850n Service Manual page 28

4024-110
Error code or
message
245.01
Paper jam
Check area K
245.02
Paper jam
Check area B
245.03
Paper jam
Check area K
250.00
Paper jam
Check areas
A, MPF
280.00
Paper jam
Check areas
A
280.01
Paper jam
Check area A
280.02
Paper jam
Check area F
281.00
Paper jam
Check area A
281.01
Paper jam
Check area F
281.02
Paper jam
Check area F
281.03
Paper jam
Check area F
2-8
Printer Service Manual
Error contents
Sensor (tray 5 feed-out) on
jam
Sensor (registration) on jam
Sensor (tray 5 feed-out) static
jam.
Sensor (registration) on
jam (MPF pick)
Sensor (bridge unit media
entrance) on jam
Sensor (bridge unit media
entrance) Static jam A
Sensor (bridge unit media
entrance) Static jam B
Sensor (bridge unit media
exit) on jam A
Sensor (bridge unit media
exit) on jam B
Sensor (bridge unit media
exit) on jam C
Sensor (bridge unit media
exit) Static jam A
Description/Action
The sensor (tray 5 feed-out) on the printer is not
turned on within the specified time after the HCF
feed lift motor is turned on.
Refer to Options Service Manual.
The sensor (registration) on the printer is not turned
on within the specified time after the HCF feed lift
motor is turned on.
Refer to Options Service Manual.
Paper remains on the sensor (tray 5 feed-out).
Refer to Options Service Manual.
The sensor (registration) is not turned on within the
specified time after the MPF pick solenoid is turned
on.
Go to "250.00 Sensor (registration) on jam (MPF
pick)" on page 2-40.
Sensor (bridge unit media entrance) is not turned on
within the specified time after the sensor (fuser exit)
in the printer is turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (bridge unit media
entrance).
Refer to Finisher Service Manual.
Paper remains on the sensor (bridge unit media
entrance).
Refer to Finisher Service Manual.
Sensor (bridge unit media exit) is not turned on
within the specified time after the sensor (bridge unit
media entrance) is turned on.
At this time, the sensor (fuser exit) in the printer is in
the on state.
Refer to Finisher Service Manual.
Sensor (bridge unit media exit) is not turned on
within the specified time after the sensor (bridge unit
media entrance) is turned on.
At this time, the sensor (bridge unit media entrance)
is in the on state.
Refer to Finisher Service Manual.
Sensor (bridge unit media exit) is not turned on
within the specified time after the sensor (bridge unit
media entrance) is turned on.
Refer to Finisher Service Manual.
Paper remains on the sensor (bridge unit media
exit).
Refer to Finisher Service Manual.