Table of Contents
Advertisement
C a l i p e r B r a k e P a d R e m o v a l
1
Use a T25 TORX wrench to remove the brake caliper from the fork or
frame.
Remove the caliper mounting bracket and hardware from the caliper
then set them aside in the order that they were removed.
2
Use needle nose pliers to remove the E-clip from the pad retention
2.5 mm hex wrench
bolt.
Use a 2.5 mm hex wrench to remove the pad retention bolt from the
caliper.
Needle nose pliers
20 mm or 15 mm Thru Axle
3
Remove the brake pads and pad h-spring from the caliper.
NOTI CE
Brake pads must be replaced if the total thickness of the backing plate
and pad friction material is less than 3 mm.
Digital Caliper
Caliper Brake Pad Removal
9
Advertisement
Table of Contents
