Section 10-Replacing The Patient Outlet Filter And Filter Connector; Replacing Patient Outlet Filter - Invacare Solo2 TPO100B Internal Repair Manual

10 REPLACING THE PATIENT OUTLET FILTER AND FILTER CONNECTOR
10 Replacing the Patient Outlet Filter and Filter Connector

10.1 Replacing Patient Outlet Filter

The patient outlet filter should be replaced according to the Solo2 Preventative Maintenance Record.
Use Invacare P/N 1164372, Patient Outlet Filter Kit.
1. With the SOLO2 in the upright position, locate the patient outlet filter.
2. Place fingers on patient outlet filter and turn counter clockwise to loosen.
3. Remove patient outlet filter and o-ring from unit.
4. Install new o-ring onto unit.
5. Install new patient outlet filter onto unit.
6. Hand tighten filter until secure.
Inlet Filter
Invacare® Solo2™ Portable Oxygen Concentrator
O-Ring
38
Patient Outlet Filter Removed
Part No 1176122