Section 21-Inlet Resonator; Replacing The Battery Input Board - Invacare Solo2 TPO100B Internal Repair Manual

21 INLET RESONATOR
21 Inlet Resonator

21.1 Replacing the Battery Input Board

1. Disassemble the Solo2. Refer to Accessing Internal Components on page 40.
2. Lift the resonator out of the Solo2 unit.
3. Disconnect the tube at the base of the resonator that feeds the compressor.
4. Attach the new resonator to the tube coming from the compressor.
5. Place the resonator back into the Solo2 feeding the tubing as show.
6. Reassemble the unit and test to ensure Solo2 is operating correctly.
DETAIL "A"
Rear Shroud
Invacare® Solo2™ Portable Oxygen Concentrator
DETAIL "B"
Resonator
Tube attaches from
DETAIL "C"
compressor here
To Inlet Filter
From Compressor to Resonator
64
To Inlet Filter
Part No 1176122