Finisher Adjustment (Ls-505); Stacker Adjustment \ 01 Paper Width Adjustment - Oce CS656 Pro User Manual

Adjustment
3.6

04 Finisher Adjustment (LS-505)

3.6.1

05 Stacker Adjustment \ 01 Paper Width Adjustment

Perform this adjustment when output sheets are not aligned in a perpendicular position to the direction of
paper feed processed by the Large Capacity Stacker LS-505.
To specify Paper Width Adjustment
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [05 Stacker Adjustment], and then [01 Paper Width Adjustment].
The Paper Width Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Specify A3 then press [Start] on the control panel.
A sample pattern will be output.
5
If output sheets are misaligned, touch [ADJUSTMENT] tab.
The Paper Width Adjustment Screen will be restored.
CS665 Pro
3
3-45