Adjustment
3.5.8
03 Multi Folder (Fold) Adj. \ 06 Gate Fold Position Adj.
Perform this adjustment for the folding positions in Gate folding mode processed by the Folding Unit FD-503.
Reminder
When adjusting Single Fold, Double Fold and Triple Fold at a time, be sure to start with the Single Fold
adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while that of Double Fold is
calculated from the position of the first fold line, and that of Triple Fold is calculated from the position
of the second fold line, therefore a distance (a), distance (b) and distance (c) in step 5 will be altered by
changing the position of any fold position.
To specify Gate Fold Position Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [06 Gate Fold Position Adj].
The Gate Fold Position Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Gate, then press [Start] on the control
panel.
A sample pattern will be output.
CS665 Pro
3
3-43