Finisher Adjustment (Fs-521); Stapler Position Adj. \ 01 Staple Center Position - Oce CS656 Pro User Manual

Adjustment
3.4

04 Finisher Adjustment (FS-521)

3.4.1

01 Stapler Position Adj. \ 01 Staple Center Position

Perform this adjustment for the center position of copied/printed sheets and of staples processed by the
Finisher FS-521.
[02 Paper Width (Staple)] is supposed to be completed before this adjustment.
To specify Staple Center Position
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [01 Staple Center Position].
The Staple Center Position Screen will be displayed.
3
Touch [COPY] tab.
4
Press [Start] on the control panel.
A sample copy will be output.
5
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Staple Center Position Screen will be restored.
CS665 Pro
3
3-19