Table of Contents
Advertisement
Adjustment
3.5
04 Finisher Adjustment (FD-503)
3.5.1
02 Multi Folder (Punch) Adj. \ 01 Paper Width Adjustment
Perform this adjustment for the specific paper size if punch holes processed by the Folding Unit FD-503
dislocate largely.
To specify Paper Width Adjustment
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [02 Multi Folder (Punch) Adj.], and then [01 Paper Width Adjustment].
The Paper Width Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify the set number to 10, then press [Start]
on the control panel.
A sample pattern will be output.
5
Check the diameter of penetrated holes when output sheets are piled up.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Paper Width Adjustment Screen will be restored.
CS665 Pro
3
3-29
Advertisement
Table of Contents
