Table of Contents
Advertisement
Adjustment
3.9.10
10 Cover Up/Down CD Width Adjustment
Perform this adjustment for the horizontal scanning position of the body set and cover.
To specify Cover Up/Down CD Width Adjustment
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [10 Cover Up/Down CD
Width].
The Cover Up/Down CD Width Adjustment Screen will be displayed.
3
Touch [Perfect Binder Tray] or [Except PB Tray] to select the tray (Main Tray or PB Tray) to feed the
cover.
4
Touch [COPY] tab.
The Copy Screen will be displayed.
5
Select the PB tray or desired main body tray if selected in step 3, then press [Start].
A sample pattern of perfect-bound book will be output.
6
Check that the horizontal scanning position of body set matches with that of the cover.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
8
Touch [+ <--> -] to specify the value to be positive or negative. Use the touch panel keypad to enter the
desired adjustment value, then touch [<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Perfect Binder Adjustment Menu Screen.
CS665 Pro
3
3-83
Advertisement
Table of Contents
