Table of Contents
Advertisement
Adjustment
3.5.6
03 Multi Folder (Fold) Adj. \ 04 Double Parallel Pos. Adj.
Perform this adjustment for the folding positions in Tri-Fold-in mode processed by the Folding Unit FD-503.
Reminder
When adjusting both Single Fold and Double Fold, be sure to start with the Double Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while that of Double Fold is
calculated from the position of the first fold line, therefore a distance (b) in step 5 will be altered by
changing the position of either Single Fold or Double Fold.
To specify Double Parallel Pos. Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [04 Double Parallel Pos. Adj.].
The Double Parallel Position Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Double Parallel, then press Start on the
control panel.
A sample pattern will be output.
CS665 Pro
3
3-39
Advertisement
Table of Contents
