Table of Contents
Advertisement
6
6.6.2
02 E-Mail Initial Setting
Specify the initial settings for e-mail.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [05 Network Setting], and then [02 E-Mail Initial Setting].
The E-Mail Initial Setting Screen will be displayed.
3
Specify the following items.
–
Enter numeric values using the touch panel keypad. After entering a value, touch Set. The next item
becomes highlighted for setting. Continue in this manner.
–
Touch [Trans (SMTP) mail server] or [Receive mail server] to enter the IP address. When using the
DNS server, the host name can also be entered. (Full path, up to 128 characters)
–
If the Name resolution is not in operation, enter the IP address as usual.
–
When using the Security Strengthen mode, only the IP address can be entered.
4
When the desired items are entered, touch [Test], then [Yes] on the popup menu to check that the
setting has been made properly.
5
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the Network Setting Menu Screen will be restored.
6
If further changes are required, touch the desired key.
6-88
Machine administrator setting
CS665 Pro
Advertisement
Table of Contents
