Table of Contents
Advertisement
Adjustment
3.5.2
02 Multi Folder (Punch) Adj. \ 02 Hole-Punch Vertical Pos.
Perform this adjustment for the position of punch holes to the direction of paper feed.
Punch holes can be adjusted separately for 2-hole punch and 4-hole punch.
To specify Hole-Punch Vertical Pos.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [02 Multi Folder (Punch) Adj.], and then [02 Hole-Punch Vertical Pos.].
3
Touch [2-Hole Punch] or [4-Hole Punch].
The corresponding Paper Width Adjustment Screen is displayed.
4
Touch [COPY] tab.
The Copy Screen will be displayed.
CS665 Pro
3
3-31
Advertisement
Table of Contents
