Adjustment
3.5.7
03 Multi Folder (Fold) Adj. \ 05 Z-Fold Position Adj.
Perform this adjustment for the folding positions in Z-Fold mode processed by the Folding Unit FD-503.
Reminder
When adjusting both Single Fold and Double Fold, be sure to start with the Single Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while that of Double Fold is
calculated from the position of the first fold line, therefore a distance (b) in step 5 will be altered by
changing the position of either Single Fold or Double Fold.
To specify Z-Fold Position Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [05 Z-Fold Position Adj.].
The Z-Fold Position Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Z-Fold, then press [Start] on the control
panel.
A sample pattern will be output.
CS665 Pro
3
3-41