Using Finisher Fs-520 - Oce CS655 Pro User Manual

12
12.3

Using Finisher FS-520

The Finisher FS-520 has a primary (main) tray and a secondary (sub) tray, each of which has the following
output modes.
Output to the primary (main) tray
Mode
Non-sort
Collate
Uncollate
Staple
Combined with the output modes above except staple mode, you can also choose to output face up or face
down, and output front to back or back to front.
Example: Make 3 copied sets from 4 original sheets
12-6
Description
Non-sort mode simply means that the offset-stacker finisher modes are not selected. Copies will
be stacked upon exit without being offset by sorted sets.
Collate mode outputs multiple copies of the original set, having each sorted set offset by 30 mm
upon exit.
Uncollate mode groups together multiple copies of each original and offsets the sets by 30 mm
upon exit.
Staple mode offsets and staples each sorted set.
Non-sort Staple
2 staples
1 oblique
staple
Collate
Offset by 30mm
Offset by 30mm
Output applications
Uncollate
CS655 Pro