Finisher Adjustment [17] - Oce 3275 User Manual

Key Operator Mode

Finisher Adjustment [17]

Use this mode to make fine adjustments to each function of the finisher.
Key Operator Mode Screen 2
Stapling&Folding Stopper Position Adjustment Screen
Trimming Stopper Position Adjustment Screen
Punch Vertical Position Adjustment Screen
1 Press [ ] to display the Help Screen, then touch
HELP
Enter a 4-digit key operator password, then touch
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 To display menus [11] to [18] of the Key Operator Mode Screen, touch
arrow key.
3 Touch
[17] Finisher adjustment
4 Touch the desired menu key to display the adjustment screen for each function.
Finisher Adjustment Menu Screen
Folding Stopper Position Adjustment Screen
Punch Adjustment Mode Screen
Punch Horizontal Position Adjustment Screen
Key Operator Mode
OK
to display the Finisher Adjustment Menu Screen.
.
to display the Key Operator
Lower
Key Operator Mode 14-49