Adjustment
3.4.3
01 Stapler Position Adj. \ 03 Paper Width (Straight)
Perform this adjustment if the paper for straight feed is misaligned in the Finisher FS-521.
To specify Paper Width (Straight)
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [03 Paper Width (Straight)].
The Paper Width (Straight) Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, touch Staple and then press [Start].
A sample pattern will be output.
5
Open the Finisher door, and withdraw the Staple unit.
–
Confirm the distance between the fixed plates and output
paper.
–
When selecting the paper which length side is 239mm or
longer, the Staple unit can not be withdrawn.
–
Remove output paper from the paper exit side, withdraw
the staple unit, and then reset the output paper in the unit.
CS665 Pro
3
3-23