Table of Contents
Advertisement
Adjustment
3.5.5
03 Multi Folder (Fold) Adj. \ 03 Tri-Fold-out Pos. Adj.
Perform this adjustment for the folding positions in Tri-Fold-out mode processed by the Folding Unit FD-503.
Note
The baseline of Single Fold is calculated from the edge of the sheet, while that of Double Fold is
calculated from the position of the first fold line, therefore a distance (b) in step 5 will be altered by
changing the position of either Single Fold or Double Fold.
To specify Tri-Fold-out Pos. Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and then [03 Tri-Fold-out Pos. Adj.].
The Tri-Fold-out Position Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Tri-Fold-out, then press [Start] on the
control panel.
A sample pattern will be output.
CS665 Pro
3
3-37
Advertisement
Table of Contents
