Table of Contents
Advertisement
Adjustment
3.7.5
06 Saddle Stitcher Adj. \ 05 Tri-Fold Position Adj.
Perform this adjustment for the three-folding positions processed by the Saddle Stitcher SD-506.
Note
When adjusting both Single Fold and Double Fold, be sure to start with the Double Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while that of Double Fold is
calculated from the position of the first fold line, therefore a distance (b) in step 5 will be altered by
changing the position of either Single Fold or Double Fold.
To specify Tri-Fold Position Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [05 Tri-Fold Position Adj.].
The Tri-Fold Position Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Tri-Fold, then press [Start] on the control
panel.
A sample pattern will be output.
CS665 Pro
3
3-57
Advertisement
Table of Contents
