Table of Contents
Advertisement
6
6.11.4
04 Security Strengthen Set
Set the Security Strengthen mode On/Off.
In order to set the Security Strengthen mode to On, it is required by your service representative to set a CE
password and a machine administrator password to your machine.
1
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen.
2
Touch [10 Security Setting], and then [04 Security Strengthen Set].
The Security Strengthen Setting Screen will be displayed.
3
Touch [On] when activating this mode, or touch [Off] when deactivating this mode.
4
Touch [OK] at the lower right side of the screen to display the Confirmation popup screen.
5
Touch [Yes] to complete the setting. The machine power will be turned off, then on.
–
Touch [No] to cancel the setting. Touch [Cancel] at the lower right side of the screen to restore the
Machine Administrator Setting Menu Screen.
6-98
Machine administrator setting
CS665 Pro
Advertisement
Table of Contents
