Table of Contents
Advertisement
Adjustment
3.9.7
07 Temperature Adjustment
Perform this adjustment to control the condition of paste to be dried by setting the temperature on the
following sensors inside the melt tank.
Melt Tank -Low: Melt tank temperature sensor/ Lw (TH4)
Pasting Roller: Pasting roller temperature sensor (TH1)
Reminder
Do not make unnecessary change of the temperature setting inside the melt tank.
To specify Temperature Adjustment
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [07 Temperature Adjustment].
The Temperature Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
5
Check that the paste applied on the body set is dried properly.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
7
Touch [Melt Tank -Low] or [Pasting Roller] to select the position to set the temperature.
CS665 Pro
3
3-77
Advertisement
Table of Contents
