Table of Contents
Advertisement
Adjustment
3.10.7
04 Tri-Fold Adjustment (FS-607 Only)
Perform this adjustment for the three-folding positions processed by the Finisher FS-607.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], and then [04 Tri-Fold Adjustment].
The Tri-Fold Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, specify Tri-Fold, then press [Start] on the control
panel.
A sample pattern will be output.
5
Check the folding positions on the output sheet.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Tri-Fold Adjustment Screen will be restored.
CS665 Pro
3
3-97
Advertisement
Table of Contents
