Saddle Stitcher Adj. \ 02 Staple Paper Width Adj - Oce CS656 Pro User Manual

Adjustment
3.7.2

06 Saddle Stitcher Adj. \ 02 Staple Paper Width Adj.

Perform this adjustment if stapled sheets are not aligned neatly processed by the Saddle Stitcher SD-506.
To specify Staple Paper Width Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [06 Saddle Stitcher Adj.], and then [02 Staple Paper Width Adj.].
The Staple Paper Width Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, select Fold & Staple and then press [Start] on
the control panel.
A sample pattern will be output.
5
Check misalignment (a), in which misalignment occurs if the paper width setting is larger than the actual
width, or paper curving (b), in which a sample set is curved if the paper width setting is smaller than the
actual width has occurred.
CS665 Pro
a
b
3
3-51