Stapler Position Adj. \ 04 Exit Guide Center Adj - Oce CS656 Pro User Manual

Adjustment
3.4.4

01 Stapler Position Adj. \ 04 Exit Guide Center Adj.

Perform this adjustment for the center position of exit guides of the Finisher FS-521.
[05 Exit Guide Paper Width] is supposed to be completed before this adjustment.
To specify Exit Guide Center Adj.
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [01 Stapler Position Adj.], and then [04 Exit Guide Center Adj.].
The Exit Guide Center Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Load the desired size of paper to be adjusted on a tray, and then press [Start].
A sample pattern will be output.
5
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Exit Guide Center Adjustment Screen will be restored.
CS665 Pro
3
3-25