12
12.6
Using Finisher FS-520/FS-607 manually
The Finisher FS-520/FS-607 with Paper inserter PI-502 installed can be operated manually, using the
operation panel provided on the paper inserter.
Place a set of paper into the lower tray. Upper tray cannot be used.
Available finishing modes according to the optional configuration are described below.
-
Finisher FS-520 + Paper inserter PI-502
–
Staple (1 staple / 2 staples)
-
Finisher FS-520 + Paper inserter PI-502 + Punch kit PK-512/PK-513
–
Staple (1 staple / 2 staples)
–
Punch
-
Finisher FS-607 + Paper inserter PI-502
–
Staple (1 staple / 2 staples)
–
Fold & Staple
–
Multi Tri-Fold
-
Finisher FS-607 + Paper inserter PI-502 + Punch kit PK-512/PK-513
–
Staple (1 staple / 2 staples)
–
Fold & Staple
–
Multi Tri-Fold
–
Punch
12-28
1 oblique staple
2 parallel staples
Fold&Staple
1 oblique staple
2 parallel staples
Start/Stop button
Start/Stop button
Multi Tri-Fold
Punch
Output applications
Punch
CS655 Pro