Installing Screen Fonts; Changing To Ethertalk - Ricoh Printer Quick Installation Manual

Mac OS Configuration
❒ For details about installation, see the operating instructions in the ATM
folder.

Installing Screen fonts

Follow the procedure below to install screen fonts.
The screen fonts described below can be found in the [Fonts] folder on the CD-
ROM.
A
Start a Mac OS.
B
Insert the CD-ROM into the CD-ROM drive.
The CD-ROM drive icon appears.
C
Double-click the CD-ROM drive icon.
The contents of the CD-ROM appear.
D
Double-click the [Mac OS 8 and 9] folder.
E
Double-click the [Fonts] folder.
F
Double-click the [Screen font] folder.
G
Double-click the [TrueType] or [Type1] folder.
Select the font type you want to use.
H
Copy the fonts you want to install in [Fonts] under [System Folder].
A confirmation message appears.
I
Click [OK].
The fonts are installed.
J
Restart the Mac OS.

Changing to EtherTalk

Follow the procedure below to configure to a Mac OS to use EtherTalk.
A
Open [Control Panel], and then double-click the AppleTalk icon.
B
On the [Connect via:] pop-up menu, click [Ethernet].
C
If you change zones, select a name on the [Current zone:] pop-up menu.
D
Close the AppleTalk control panel.
254