Ricoh Printer Quick Installation Manual page 267

Preparing for Printing
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Create a new port:].
H
Click [SmartDeviceMonitor], and then click [Next >].
I
Click [IPP].
J
In the [Printer URL] box, enter "http://(printer's address)/printer" as the
printer's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter "https://(printer's address)/printer" (Internet Explorer
5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://(printer's address)/ipp" as the printer's address.
K
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box
becomes the IPP port name.
L
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
M
Click [OK].
N
Check that the name of the printer driver you want to install is selected,
and then click [Next >].
O
Change the name of the printer if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
P
Click [Next >].
27