Attaching Paper Feed Unit Type 3000 - Ricoh Printer Quick Installation Manual

Installing Options

Attaching Paper Feed Unit Type 3000

When installing multiple options, install the paper feed unit first.
• The printer weights approximately 32 kg (70.5 lb.). When moving the print-
er, use the inset grips on both sides, and lift slowly. The printer will break or
cause injury if dropped.
• Lifting the paper feed unit carelessly or dropping it may cause injury.
❒ The paper feed unit weighs approximately 7.5 kg (16.5 lb).
❒ Up to two paper feed units can be attached to the printer.
❒ When two paper feed units are installed, they are identified as "Tray 2" and
"Tray 3" starting from the upper unit.
❒ Before using the new paper feed unit, you must make settings in the printer
driver.
A
Turn off the power, and then unplug the power cable.
B
Check the package contains the following:
❖ Paper Feed Unit / Paper tray (inside the Paper Feed Unit)
C
Remove the adhesive tape.
47