Ricoh Printer Quick Installation Manual page 271

Preparing for Printing
B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C
Click the [Details] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
Windows 2000 / Windows NT 4.0:
A
Open [Printers] window from [Start] menu.
B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C
On the [Ports] tab, click [Configure Port].
The [Port Settings] dialog box appears.
Windows XP, Windows Server 2003:
A
On the [Start] menu, point to [Settings], and then click [Printers].
B
In the [Printers] window, click the icon of the printer you want to use. On
the [File] menu, click [Properties].
C
Click the [Details] tab, and then click [Configure Port].
The [Port Settings] dialog box appears.
• For TCP/IP, timeout setting can be configured.
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow
the procedure below.
A Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the Smart-
DeviceMonitor for Client icon on the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Par-
allel Printing for each port] check box.
D Click [OK] to close the [Extended Features Settings] dialog box.
• User, proxy, and timeout settings can be configured for IPP.
For information about these settings, see SmartDeviceMonitor for Client
Help.
31