Ricoh Printer Quick Installation Manual page 416

Monitoring and Configuring the Printer
B
On the [Group] menu, point to [Search Device], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP(SNMPv3)]. A list of printers using the selected protocol
appears.
❒ Select the protocol of the printer whose configuration you want to change.
C
Select a printer in the list.
D
On the [Tools] menu, click [NIB Setup Tool].
A Web browser opens and the dialog box for entering the password for the
Web Image Monitor administrator appears.
NIB Setup Tool starts when the network interface board is default. Follow the
instruction on the screen.
E
Enter the user name and password, and then click [OK].
Top Page of Web Image Monitor appears.
Contact your network administrator for information about the settings.
F
Click [Configuration].
G
Click [Device Settings].
H
On the [System] page, enter the device name in the [Device Name:] box and
a comment in the [Comment] box, and click [Apply].
• In the [Device Name:] box, enter a device name on the printer using up to 31
characters.
• In the [Comment] box, enter a comment on the printer using up to 31 char-
acters.
I
Click [OK].
J
Quit Web Image Monitor.
K
Quit SmartDeviceMonitor for Admin.
176