Diprint - Ricoh Printer Quick Installation Manual

Monitoring and Configuring the Printer
❖ Current interface priority configuration display
msh> dhcp priority
❖ Interface priority configuration
msh> dhcp priority "interface_name"
• You can select which interface has DHCP parameter priority.
• Priority settings are available when multiple interfaces are installed.
❖ DNS server address selection
msh> dhcp dnsaddr {dhcp | static}
• Specify whether to obtain the DNS server address from the DHCP server
or use the address set by a user.
• To obtain the DNS server address from the DHCP server, specify "dhcp".
To use the address set by a user, specify "static".
❖ Domain name selection
msh> dhcp domainname {dhcp | static}
• Specify whether to obtain the domain name from the DNS server or use the
domain name set by a user.
• To obtain the domain name from the DHCP server, specify "dhcp". To use
the domain name set by a user, specify "static".
For details about DHCP functions, see
For details about setting the DNS server address, see
For details about setting the domain name, see

diprint

The direct printing port enables direct printing from a network-connected compu-
ter.
Use the "diprint" command to change direct printing port settings.
❖ View settings
The following command displays the current direct printing port settings:
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect on
• The "Port" specifies the port number of the direct printing port.
p.279 "Using DHCP".
p.186
p.187 "domainname".
"dns".
185