Ricoh Printer Quick Installation Manual page 467

Monitoring and Configuring the Printer
Message
inetd start.
IPP cancel-job: permission denied.
ipp disable.
ipp enable.
IPP job canceled. jobid=%d.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY|NDS|BINDERY>)
multid start.
nbstart start. (NetBEUI)
NBT Registration Broadcast(<NetBIOS
name>)
nbtd start.
NetBEUI Computer Name =<computer name> The NetBEUI computer name is specified.
nmsd start. (NetBEUI)
npriter start. (NetWare)
nwstart start. (NetWare)
Open log file <file name>
papd start. (AppleTalk)
phy release file open failed.
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
Print server <print server name>has no printer. (In the print server mode) The printer is not as-
print session full
Problem and solutions
The inetd service has started.
The printer could not authenticate the name of
the user attempting to cancel a job.
Printing with ipp is disabled.
Printing with ipp is enabled.
The spooled job was canceled due to error or
user request.
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.
(In the print server mode) Login to the file serv-
er is in the NDS or BINDERY mode.
Data transmission service for multiprotocols
has started.
The service for NetBEUI protocol stack setting
has started.
Use a local broadcast to map the NetBIOS
name with the IP address.
The nbtd service has started (available only in
the DHCP mode).
The nmsd (Name Server Daemon) service has
started.
(In the remote printer mode) The NetWare
service has started.
The service for NetWare protocol stack setting
has started.
(In the print server mode) The specified log file
has been opened.
The AppleTalk print service has started.
Replacing the network interface board is re-
quired. Contact your sales or service repre-
sentative.
(In the print server mode) The print queue can-
not be established. Make sure that print queue
exists on the specified file server.
signed to the print server. Using NWadmin, as-
sign the printer, and then restart it.
No more print jobs can be accepted.
227