Ricoh Printer Quick Installation Manual page 470

Monitoring and Configuring the Printer
Message
SNMPD: account is unavailable:
The authentication password is not set up.
SNMPD: account is unavailable:
encryption is impossible.
SNMPD: trap account is unavailable.
snmpd start.
started.
Started.
Terminated.
The print server received error <error number>
during attempt to log in to the network. Access
to the network was denied.Verify that the print
server name and password are correct.
WINS name refresh :Server No Response
WINS name registration/refresh error code(er-
rornumber)
WINS name registration:Server No Response There was no response to the registration re-
WINS server address0.0.0.0
WINS Server=<WINS server address> NetBI-
OS Name=<NetBIOS name>
WINS wrong scopeID
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about "syslog" command, see
Problem and solutions
User account is disabled. This could be be-
cause the authentication password is not set,
and only the encryption account is set.
Encryption is not possible and account is disa-
bled. This could be because:
• Security option is not installed.
• Encryption password has not been speci-
fied.
v3Trap cannot be sent. This could be because
the Trap destination account is different from
the account specified by the printer.
The snmpd service has started.
The direct print service has started.
The rendezvous function is enabled.
The rendezvous function is disabled.
Login to the file server failed. The print server
is not registered or a password is specified.
Register the print server without specifying a
password.
There was no response to the update request
from the print server. Check that the WINS
server address is correct and the WINS server
is working properly.
Set unique NetBIOS names.
Check that the WINS server address is correct
and the WINS server is working properly.
quest from the server. Check that the WINS
server address is correct and the WINS server
is working properly.
The WINS server was not specified. Specify
the WINS server address to match the printer
name with WINS.
The printer name was successfully registered.
The scope ID is incorrect.
Specify the correct scope ID.
p.204 "syslog".
230