Ricoh Printer Quick Installation Manual page 380

Making Printer Settings Using the Control Panel
❒ Default: Auto Detect
❖ Sub Paper Size
You can select [Off] or [Auto] to enable the Sub Paper Size function. When
you select [Auto], the printer uses an alternative paper size if the currently
specified paper is not loaded. When you select [Off], the printer uses any size
paper in the current specified paper tray.
• Off
• Auto
❒ Default: Off
❖ Page Size
You can specify the default paper size.
8 1/2 x 14, 8 1/2 x 11, 5 1/2 x 8 1/2, 7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x
13, A4 (210 x 297), B5 JIS(182x257), A5 (148 x 210), A6 (105 x 148), 16K
(195 x 267), 4 1/8 x 9 1/2, 3 7/8 x 7 1/2, C5 Env(162x229), C6 Env(114x162),
DL Env(110x220), Custom Size.
❒ Default:
• Metric version: A4 (210 x 297)
• Inch version: 8 1/2 x 11
❒ The initial paper size is applied when the paper size is not specified in the
print data.
❖ Def.Print Lang.
You can specify the initial printer language if the machine cannot detect the
printer language.
• PCL
• PS
• PDF
❒ Default: PCL
❖ Duplex
You can specify whether or not to print on both sides of a sheet.
• Off
• Short Edge Bind
• Long Edge Bind
140