Ricoh Printer Quick Installation Manual page 67

Cleaning and Adjusting the Printer
A
Press the {Menu} key.
The [Menu]screen appears.
B
Press the {U} or {T} key to display [Maintenance], and then press the {#
Enter} key.
Menu:
Maintenance
The maintenance menu appears.
C
Press the {U} or {T} key to display [Color Calibrate], and then press the {#
Enter} key.
❒ If you perform only correction 2, proceed to step
D
Check [Start Calibr. 1] is displayed, and then press the {# Enter} key.
E
Check [Yes] is displayed, and press {# Enter} key to print gradation cor-
rection sheet 1.
F
Set the gradation correction value of the highlighted part using correc-
tion 1. For setting K (black) gradation, hold the correction value (0-6) for
"K" of the correction value setting sheet 1 over the color sample (K) for
gradation correction 1 of the Color Calibration Sample Sheet, and set
the numerical value of the closest color using either the {U} or {T} key.
Set the correction value using the supplied Color Calibration Sample Sheet
and the gradation correction sheet 1 printed in the previous step.
Set M (magenta), C (cyan), and Y (yellow) using the same method.
Calibrate 1:
K:3 M:3 C/Y:3/3
L
.
63