Ieee 1394 Configuration; Ip Over 1394 - Ricoh Printer Quick Installation Manual

Configuration

IEEE 1394 Configuration

Use this procedure to configure the printer for use in an IEEE 1394 environment.
The following table shows the control panel settings and their default values.
These items appear in the [Host Interface] menu.
Setting Name
DHCP
IP Address1394
Subnet Mask1394

IP over 1394

SCSI print
Bidi-SCSI print
❒ If DHCP is in use, [IP Address1394] and [Subnet Mask1394] are automatically set.
IP over 1394
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Host Interface] menu, and then press
the {# Enter} key.
Menu:
Host Interface
The interface setting menu appears.
C
Press the {U} or {T} key to display [IEEE 1394 Setup], and then press the
{# Enter} key.
The IEEE 1394 setting menu appears.
Value
On
011.022.033.044
000.000.000.000
Active
Active
On
101