Dial Call Pickup Group Assignment - Panasonic EASA-PHONE KX-T61610 Installation Manual

a
[24] [NEXT] [NE
or
t
---.-----.rrnril the desired exrension number appears
m] [A...Dl [MEM,ORY] [END]
1241 [NEXT] [AB] [A.. .D] [MEMORY] [END]
AB=[*]: to assign thesame on all 16 extensions
Description
Pertnits an extension user fo answer othet
ringing telephones, provided that they are in the
same pickup group.
Programming
1. Dial (24).
"PICKUP GROUP" will be displayed.
2. Press rhe NEXT burron.
"ENTER EXT NO" will be displayed.
3. Press rhe NEXT burton.
"11: PKG: 1" will be displayed and "1" will
blink. This means that extension 11 belongs
to pickup group 1.
4. Dial the pickup group number (1 through 4)
to be entered.
The desired combination of pickup group
will be displayed.
1
To -be out of any groups, press the
CLEAR button instead of group number.
5. Press the MEMORY button.
The LCD will stop blinking.
6. Repeat steps 3 10 5, to program the assign.
men1 of fhe other exretisions.
7. To relrcrti lo the initial program mode, press
the Eh'D burron.
Conditions
peach extension may belong to more than one
pickup group, up to four, or tnay nof belong to
a group.
l
When you start the programming from step 1,
you may dial the desired extension numbet
instead of the NEXT button at step 3.
.The PREV buuon allows you IO go fo rhe
previous extension for displaying rhe pickup
group assignment. *
Examples:
l
extension 14.. Jickup Group 2
[24][NEXT][14][2][MEMORY][END]
*extension 15...Pickup Group 3
[24](NEXTj[15][3][MEMORY][END]
Programming Table
See page 6-18.
_ -
3-33