System Maintenance Alert Settings - Intermec PC23 User Manual

Chapter A —

System Maintenance Alert Settings

146
Service Description
Net1 Determines if the printer can use Telnet to
communicate with Fingerprint.
SmartSystems Determines if the printer can be managed by
Intermec SmartSystems Foundation.
SNMP Determines if the printer can use SNMP.
LPR Determines if the printer can use the line printer
server (LPR) daemon.
IKEv2 Determines if the printer can use IKEv2.
SSH Determines if the printer can use Secure Socket
Handling (SSH).
Telnet Determines if the printer can use Telnet.
This section describes the system maintenance alert settings, such as
the odometer distance. To view these settings:
• From the printer Main Menu, select Settings > System Settings >
Maintenance Alerts.
• From the printer home page, click the Configure tab > System
Settings > Maintenance Alerts.
Setting
Odometer (User
Resettable)
Odometer (Printer)
Description
Sets the length of media (in meters) that the
printer prints before the Odometer (User
Resettable) alert is sent, if this alert is
configured. Unit of measurement is defined
in the Unit of Measure parameter. Range is 0
to 4294967295.
Sets the length of media (in meters) that the
printer prints before the Odometer (Printer)
alert is sent. Unit of measurement is defined
in the Unit of Measure parameter. Range is 0
to 4294967295.
PC23 and PC43 Desktop Printer User Manual
Default
Enable
Enable
Enable
Enable
Disable
Enable
Enable
Default
0
N/A