List Of Error Codes Without Messages - Canon Color imageRunner C3220 Reference Manual

List of Error Codes without Messages

If a job or operation does not complete successfully, check the error code, and
perform the necessary operations according to the error code displayed. You can
check the error code on the Details screen under [Log] from the System Monitor
screen. (See "Job Details," on p. 5-11.)
If a send, receive, or fax job does not complete successfully, the error code is
printed in the Results column on the Activity Report and Send Report. However, if a
send job is canceled, "STOP" is printed in the Results column on the Send report.
(See Chapter 12, "Printing Communication Reports," in the Sending and Facsimile
Guide.)
Perform the necessary procedures according to the error code.
# 001
Cause Paper or originals are jammed.
Remedy Remove any jammed paper or originals. (See "Clearing Paper Jams," on p. 8-3,
and "Feeder (DADF-K1) (Optional)," on p. 8-45.)
# 009
Cause 1 There is no paper.
Remedy Load paper. (See "Paper Drawers," on p. 7-2.)
Cause 2 The paper drawer is not inserted correctly into the machine.
Remedy Insert the paper drawer properly. (See "Paper Drawers," on p. 7-2.)
# 037
Cause Documents could not be received because there was insufficient memory
available.
Remedy Erase unwanted documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 6, "Receiving
Documents," in the Sending and Facsimile Guide, and Chapter 5, "Using/
Arranging Documents Stored in an Inbox," in the Mail Box Guide.)
List of Error Messages
8
8-79