Department ID Management
This section describes how to change the password and page limit, and how to
check the print totals when the control card is being used.
3
NOTE
•
The maximum number of digits that you can register for the password is seven. If you
enter fewer than seven digits, the machine registers the password with leading zeros.
- Example: If <321> is entered, then <0000321> is registered.
•
You can set the page limit from 0 to 999,999 pages.
Changing the Password and Page Limit
1
3-32
Card Reader-D1
IMPORTANT
•
Once you have removed the control card, you cannot operate the machine until the
control card is inserted again.
•
The control card must remain inserted to make copies with the Auto Start function,
until copying is complete.
(Additional Functions) © [System Settings].
Press
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
(numeric keys) © press
-
(ID).